new snapshot

[Izumi Tsutsui]

I've put a new NetBSD/newsmips -current snapshot:

ftp://ftp.netbsd.org/pub/NetBSD/arch/newsmips/snapshot/20020417/

Enjoy,
---
Izumi Tsutsui
***@ceres.dti.ne.jp

[NAKAJI Hiroyuki]

I cannot boot my NWS-5000SB with new snapshot from local scsi disk.
The kernel boots up, gets panic, reboot, and hangs up probing scsi bus.

Any help? Thanks in advance.

Here is console log.

bo scsi(1,11)

NetBSD/newsmips Primary Boot
NetBSD/newsmips Secondary Boot
Booting scsi(1,11)
2091184+200728 [89+84608+72316]=0x25605c

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

NetBSD 1.5ZC (GENERIC) #0: Sat Apr 20 01:25:05 JST 2002
***@vr4:/mnt/src/sys/arch/newsmips/compile/GENERIC
total memory = 31744 KB
avail memory = 26844 KB
[snip]
scsibus1: waiting 2 seconds for devices to settle...
panic: spifi_intr RQOVRN
syncing disks... done
rebooting...

NetBSD/newsmips Primary Boot
NetBSD/newsmips Secondary Boot
Booting scsi(1,11)
2091184+200728 [89+84608+72316]=0x25605c
[snip]
wsdisplay0 at xafb0 (kbdmux ignored)
scsibus1: waiting 2 seconds for devices to settle...
[Hang up here]

[Izumi Tsutsui]

Post by NAKAJI Hiroyuki
I cannot boot my NWS-5000SB with new snapshot from local scsi disk.
The kernel boots up, gets panic, reboot, and hangs up probing scsi bus.
Any help? Thanks in advance.

Did you boot NEWS-OS before booting NetBSD?
Sometimes it caused problem. It seems some more initialization
is needed for SPIFI SCSI, but I have not tracked it yet.
Does your news5000 not boot NetBSD properly even after power-cycle?

Post by NAKAJI Hiroyuki

bo scsi(1,11)

Did you connect external disks? If so, please also check
cables and terminators. It might cause problem even if
it has no problem with NEWS-OS. There is few sanity checks
in our SPIFI driver.

BTW, the snapshot was built on NWS-5000X with SCSI disks on SPIFI ;-)
---
Izumi Tsutsui
***@ceres.dti.ne.jp

[NAKAJI Hiroyuki]

IT> Did you boot NEWS-OS before booting NetBSD?

Yes.

IT> Sometimes it caused problem. It seems some more initialization
IT> is needed for SPIFI SCSI, but I have not tracked it yet.

I see. But the last snapshot's kernel did boot on such
situation. Strange...

IT> Does your news5000 not boot NetBSD properly even after power-cycle?

I'll check it later.

bo scsi(1,11)

IT> Did you connect external disks?

Yes, internal disk is used for NEWS-OS's root partition. :)

IT> If so, please also check cables and terminators. It might cause
IT> problem even if it has no problem with NEWS-OS. There is few sanity
IT> checks in our SPIFI driver.

Oops. The cable i'm using is the only one I have whose connector is
large 50pin (old SCSI) vs half 50pin (SCSI2 or Ultra SCSI). It is hard to
get now.

IT> BTW, the snapshot was built on NWS-5000X with SCSI disks on SPIFI ;-)

Good news. Thanks.

[NAKAJI Hiroyuki]

IT> Does your news5000 not boot NetBSD properly even after power-cycle?

nakaji> I'll check it later.

I got it! Thanks!!

Now, I execute build.sh in /usr/src.